Hello Forum,
a friend of mine left this world not so long ago and I got a small oscilloscope. I think the cause why I want it to be working is obvious. Howevery, I have no schematic at all and all three tubes are missing.
I recreated most of the schematics manually and I measured every single voltage at the 3 sockets. Maybe someone out there is able to find out wich tubes used to be in there?
While measuring, something strange happened: I exidentally shortet 2 pins. Before that, there was just a dot on the screen. Now, there is a line though a few “parts” a missing.
This is the schematic: https://www.mediafire.com/folder/sx4v9mvdb3iyh/oscilloscope (I don’t know how to add files. If this is not the appropiate way of doing it, please let me know.)
Since I’m from german, here are the translations:
Helligkeit = Brightness
Schärfe = Sharpness
Schirmung für Oszi-Röhre = Shielding for oscilloscope tube
Zeitablenkung = time deflection (I don’t know what that is, but this is what it says on the front.)
fein = fine
Thanks a lot!
I don’t know how to add files. If this is not the appropiate way of doing it, please let me know.)
I am finding links to my Google drive seem to work for me.
I sure there are other storage that you could share links.
Larry – N7LUF