Hi Mr C, just had a thought while finishing up building the ultra probe. It would be helpful to me and possibly many, if you would do a video showing verification tests that we could perform while building projects prior to final assembly. Just thought it would be great to have indication that it was operational.
Just a thought, love the projects, thanks for everything
While I don’t disagree that providing “standards” wouldn’t be a bad idea, in most cases the calibration of the project should indicate its function. For projects that aren’t subject to a calibration, that may be a bit harder to determine. Being able to baseline a device in that case would be beneficial using provided specs as in X amount of signal input should yield near X amount of output. It is a loaded question either way but something to consider.
Radios + Tubes + Scopes + Cars= Nothing better!
I like the idea. Something simple could be tested such as: After inserting part 1, part 2, part 3, you should be able to see X ohms across all three,etc. It may not be feasible to do this but if it is, it would be great —– especially for us that aren’t quite as advanced in this field.